ICP DAS PMC/PMD Series User Manual
84
Figure7-12 :
Select Modbus TCP Power Meter model
iv
Nickname: For user to define a nickname for this power meter, this
nickname will be displayed on the “Power meter Information” and
“Rule Setting” pages. Default setting will be the model of the power
meter.
v
Click
to add the meter to the list (Figure 7-13). After adding the
power meter, click “Save” button to save the changes.
Figure7-13 :
Add the Modbus TCP Power Meter manually
7.1.4
Power Meter List Interface
After the Modbus RTU/TCP Power Meters are added to the power
meter list via auto scan or manual work, the Modbus RTU/TCP Power
Meters will be listed as below:
Figure7-14 :
Power Meter List Interface
The following functions allow to perform settings or rearrange order of
the power meters. Please select the power meter and click on the
function button to perform the operations:
Setting: Click the radio button in front of the power meter and
click on “Setting” to get into the setting page of the power meter.
The settings for each power meter module will be given in the
following section.
Move Up: Click the radio button in front of the power meter
Содержание PMC series
