ICP DAS PMC/PMD Series User Manual
162
On Figure 10-11, taking the first SMS Command on the list as an
example, when user send SMS message “DATA” to PMC-5151,
PMC-5151 will send back the data of DI0, DI1, & DI2 of the
XW310C(XW-Board), the Total/Average value of the kW from
module PM-2133(2) on COM2, and value of Internal Register 1 to
the command sender.
Taking the second SMS Command on the list as an example, when
user send SMS message “AO” to PMC-5151, PMC-5151 will set
the value of AO0 on XW310C(XW-Board) to be 2.3 after
receiving the message.
Taking the third SMS Command on the list as an example, when
user send SMS message “DO” to PMC-5151, PMC-5151 will set
the value of DO0 on XW310C(XW-Board) to be ON after
receiving the message.
ix
To modify the settings of a pre-set SMS Command, please click on
the radio button in front of the SMS Command, and then click on
“Setting” to modify the settings.
x
To copy the settings of a pre-set SMS Command to the new SMS
Command, please click the radio button in front of the pre-set SMS
Command and then click “Copy”, a new SMS Command will be
added to the list and the settings of the old SMS Command will be
copied to this newly added SMS Command.
xi
To remove a pre-set SMS Command, please click the radio button in
front of the pre-set SMS Command and then click “Remove”.
After you finish all the SMS Command selections and settings, click “Save”
button to save the settings.
Содержание PMC series
