ICP DAS USA PMC series, Руководство пользователя

Страница: 105 / 340

ICP DAS PMC/PMD Series User Manual
92
Figure7-20 : XW-Board DO attribute setting page
The settings are as follow:

Nickname
：
For user to define nicknames for each I/O channel,
this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.
 Power On Value: Specify the initial status to be “ON” or to be
“OFF” when PMC-5151 power on. Select the value from the
dropdown list of “Power On Value” field. The default value is
“OFF”.

PMC-5151 provides 3 advanced functions, select the function
from the dropdown list:

Pulse Output: If the Pulse Output is selected, it will allow this
DO channel to perform pulse output and form a periodic
pulse cycle. In Pulse Output mode, the selected DO channel
will generate a square wave according to specified parameters
(Pulse High and Pulse Low). Pulse High indicates the “ON”
time duration and Pulse Low indicates the “OFF” time
duration in a periodic Pulse cycle. The unit is 100ms.
 Auto OFF: When “Auto OFF” is selected, it allows this DO
channel to enable Auto OFF function. It is required to set up a
time interval, when this DO channel is set to be “ON” and the
duration of the ON status reaches the pre-set time interval ,
the DO will automatically be set to OFF. The unit is second.