ICP DAS USA PMC series Скачать руководство пользователя страница 101

Страница: 101 / 340

ICP DAS PMC/PMD Series User Manual

After all settings are completed, click “OK” button to return to the

Power Meter List.

7.1.6

Modbus TCP Power Meter Setting

PMC/PMD support ICP DAS Single-phase Modbus TCP Power Meters,

the following section will give more detailed settings of the power

meter setting page. (Using PM-3144-MTCP as an example):

Figure7-17 :

PM-3114-MTCP Setting Page

The settings are as follow:



Nickname

：

For user to define nicknames for each power meter,

this nickname will be displayed on the “Power Meter
Information” and “Rule Setting” pages.



Description: The Description field provides a space for the user

to make a brief description of this power meter.



IP: The address will be the IP address of this power meter,

please make sure the IP address setting is the same as the

settings of the module, if the setting is not accurate, the

connection for PMC/PMD to the power meter will be failed.



Port: The setting will be the Port number of this power meter,

please make sure the Port number is the same as the settings of

Содержание PMC series





















































































































































































































































































































































Результаты поиска

Содержание PMC series

Отзывы:

ICP DAS USA PMC series, Руководство пользователя, Страница: 101 / 340

Результаты поиска

Содержание PMC series

Отзывы: