ICP DAS USA PMC series, Руководство пользователя

Страница: 100 / 340

ICP DAS PMC/PMD Series User Manual
87

The Single-Phase Modbus RTU Power Meter Setting page is shown
as follow (using PM-3114 as an example):
Figure7-16 : PM-3114 Setting Page
The settings are as follow:

For the settings of Nickname, Description, Address, Scan Rate,
Polling Timeout, Retry Interval and Main Power Meter, please
refer to “Three-Phase Modbus RTU Power Meter Setting”
section.

CT / Phase Nickname: For user to define nicknames for each
CT (or phase), this nickname will be displayed on the “Power
Meter Information” and “Rule Setting” pages. For single-phase
power meter, the user could give nicknames to the CT1/CT2/
CT3/CT4.

DO Attribute
：

Nickname
：
For user to define nicknames for each DO
channel, this nickname will be displayed on the “Power
Meter Information” and “Rule Setting” pages.

Power On Value: Set up the initial value for the DO
channels when the power meter is powered on.