ICP DAS USA PMC-523 Series, Руководство пользователя

Страница: 216 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
201
can be included in the IF condition statements; the editing page for
Coil Output Condition Setting is shown as below:
Figure11-7 : Coil Output condition setting page
Follow the steps below:
i Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the “Module &
Address” section that you are going to include its value in the
IF condition statements.
ii Define the evaluation criteria of the status in IF statement to be
“OFF” or “ON”.
iii
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.1.2.3 Input Register
Input Register channel value from Modbus TCP/RTU Slave
module can be included in the IF condition statements; the editing
page for Input Register Condition Setting is shown as below:
Figure11-8 : Input Register condition setting page
Follow the steps below:
i Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the “Module &
Address” section that you are going to include its value in the
IF condition statements.
ii Set up the expression statement for this Input Register address
value. Select an operator from “=”,”>”,”<”,”>=” or “<=”.
iii And then specify the evaluation value. If this Input Register