ICP DAS USA PMC-523 Series, Руководство пользователя

Страница: 215 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
200
Accumulated Electricity and Yearly Accumulated Electricity.
And then select module and channel from the dropdown list
to specify which power meter and loop(or phase) value will
be used.
v
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.1.2 Modbus Module
Click on “Modbus Module”, 4 options will appear as the following:
Discrete Input, Coil Output, Input Register and Holding Register.
11.1.2.1 Discrete Input
Discrete Input channel value from Modbus TCP/RTU Slave
module can be included in the IF condition statements; the editing
page for Discrete Input Condition Setting is shown as below:
Figure11-6 : Discrete Input condition setting page
Follow the steps below:
i Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the “Module &
Address” section that you are going to include its value in the
IF condition statements.
ii Define the evaluation criteria of the status in IF statement to be
“OFF” or “ON”.
iii
Click “OK” button to confirm the settings and return to the
Rule settings page.
11.1.2.2 Coil Output
Coil Output channel value from Modbus TCP/RTU Slave module