ICP DAS USA PMC-523 Series Скачать руководство пользователя

Страница: 119 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

104

Figure7-40 :

M-7000/DL AI Channel Setting Page

The settings are as below:



Nickname

：

For user to define nickname for each I/O channel,

this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.



Type: Select the input signal type of the AI channel from the

dropdown list.



Deadband: Please refer to Deadband section in the “

7.2.3

XV-Board AI Channel Settings

” for more detailed information.



Scale: Please refer to Scale section in the “

7.2.3 XV-Board AI

Channel Settings

” for more detailed information.

After all settings are completed, click “OK” button to save the

changes and return to Modbus RTU Module List.

Содержание PMC-523 Series




























































































































































































































































































































































Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды

ICP DAS USA PMC-523 Series, Руководство пользователя

Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды