ICP DAS USA PMC-523 Series Скачать руководство пользователя

Страница: 102 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

7.2

XV-Board Setting (PMD series does not support this function.)

XV-Board is used to connect with PMC. The setting page allows the user to

set up the XV-Board that are connected to the PMC. The XV-Board Setting

page is shown as follow:

Please note: Each PMC is allowed to connect to one XV-Board module

only.

Figure7-18 :

XV-Board Setting Page

Select the XV-Board that are connected to the PMC from the drop down list
and click “Setting”, a window for setting up the parameters of XV-Board

and its I/O channel will appear. The setting for the module is shown as

below:



Nickname: For user to define a nickname for the module, this
nickname will be displayed on the “I/O Information” and “Rule
Setting” pages.



Description: The Description field provides a space for the user to

make a brief description of this XV-Board.

The following section will introduce the DI, DO, AI and AO channel

settings of the XV-Board. After all settings are completed, click “Save”

button to save the changes.

7.2.1

XV-Board DI Channel Settings

The XV-Board DI Channel Setting page is shown as follow (using

PMC-5231+XV107 as an example):

Содержание PMC-523 Series




























































































































































































































































































































































Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды

ICP DAS USA PMC-523 Series, Руководство пользователя

Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды