background image

ICP DAS Co., LTD 

PM-3133i Quick Start V1.00 

Page 1 

PM-3133i Quick Start 

1.  Shipping Package 

This shipping package contains the following items

 

 

1 x PM-3133i module    1 x Quick Start      Screw Driver x 1    Cable ties x 3 

 

 

1.1. Caution & Warning 

The meter contains hazardous voltages, and should 

never be disassembled. Failing to follow this practice will 

result in serious injury or death. Any work on or near energized meters, 

meter sockets, or other metering equipment could induce a danger of 

electrical shock. It is strongly recommended that all work should be 

performed only by qualified industrial electricians and metering 

specialist. ICP DAS assumes no responsibility if your electrical installer 

does not follow the appropriate national and local electrical codes. 

ICP DAS assumes no liability for any damage resulting from the use of 

this product. ICP DAS reserves the right to change this manual at any 

time without notice. The information furnished by ICP DAS is believed 

to be accurate and reliable. However, no responsibility is assumed by 

ICP DAS for its use, not for any infringements of patents or other rights 

of third parties resulting from its use. 

Содержание PM-3133i









Отзывы: