ICP DAS USA PISO-DNS100U Скачать руководство пользователя

Страница: 1 / 8

PISO-DNS100U DeviceNet Multi-Slave PCI board

Quick Start User Guide

Introduction

This Quick Start User Guide introduces users how to implement the PISO-DNS100U PCI

board to your application quickly. Therefore, it is only provided with the basic instructions. For

more detailed information, please refer to the PISO-DNS100U manual in the ICPDAS CD-ROM.

Also, users can download the manual from the ICPDAS web site:

http://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100.htm

This manual would help you quickly to familiarize yourself with the PISO-DNS100U PCI

board and DeviceNet communication. For more the detail information, please refer to the user’s

manual of the PISO-DNS100U. Here is the example of the DeviceNet network.

The users should prepare at least one DeviceNet master for demonstrating the I/O data

exchanging. The users can use the PLC with DeviceNet master module to start this demo. There are

some DeviceNet master products provided by ICPDAS, such as PISO-DNM100U, PISO-CAN

200/400…etc. Please visit the following web site for more information.

http://www.icpdas.com/products/Remote_IO/can_bus/can_intro.htm#5

PISO-DNS100U Quick Start Manual (Version 1.0, Jan/2010) ------------

Содержание PISO-DNS100U








