![background image](http://html1.mh-extra.com/html/icp-das-usa/piso-dns100-d-t/piso-dns100-d-t_user-manual_4476352032.webp)
4.2 Flow Diagram for Slave Configuration
After deciding the DeviceNet I/O size and connection type of the virtual
slave devices, users should save the parameters into the EEPROM in PISO-
DNS100(U). The EEPROM would store the configuration data. The firmware in
PISO-DNS100(U) would load the previous configuration from the EEPROM in
the next boot-up. After setting the configuration data, the users should reset
the firmware in the PISO-DNS100(U) to make new configuration active. The
configuration diagram is shown in Figure 4.2.1. There is more information
about those functions in the next chapter.
Figure 4.2.1 Slave Configuration Diagram
PISO-DNS100(U) DeviceNet Slave API functions User’s Manual (Ver: 1.1) 2010/01/07
32
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru