PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 5
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
1.
Introduction
CAN FD (CAN with Flexible Data-Rate) is a newer extension version of the CAN 2.0
protocol. It was developed by Bosch and was released in 2012. It has been significantly
improved during the standardization process and is nowadays in ISO 11898-1:2015.
The CAN FD speeds up the data transmission and packs more data into each
message.
PISO-CANFD series board (included PISO-CAN200U-FD and PISO-CAN400U-FD)
is a very powerful and economic solution for an active CAN board, containing two/four
CAN channels that cover a wide range of CAN applications. It uses Microchip CAN FD
controllers and TI TCAN1042HG series transceivers, which provide bus arbitration and
error detection features, combined with auto-correction and re-transmission
functionality. As the PISO-CANFD series board is state-of-the-art, it can be installed in
either a Universal PCI bus.