ICP DAS USA MDC-211-ZT Скачать руководство пользователя страница 43

Страница: 43 / 46

ICP DAS, MDC-211-ZT user manual , v1.0 Page 42

Q6 - How to update the firmware?

Mdc-211-ZT can update the firmware via a software tool (Windows) by the following steps:

(1)

Download the latest version of the firmware program and update Tool (FW_Update_Tool)

on the MDC-211-ZT product page and store it in a computer that you want to connect

to MDC-211-ZT.

Firmware Program:

http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zt_series/firmware/mdc-211-zt

Update Tool:

http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zt_series/tools

(2)

Short the FW with P.GND of MDC-211-ZT and turn on the power. When the six LEDs of

MDC-211-ZT turn blinking alternately, the MDC-211-ZT is successfully entered the

firmware updating mode.

(3)

Execute “FW_Update_Tool.exe” with the administrator privileges ( ) and follow the steps

as Figure 5.3:

In "Download Interface", select a network port for connecting to MDC-211-ZT.

In "Firmware Path", select the latest firmware update file (MDC211ZT_xxxx.fw).

In "Firmware Update", click “Update” to start the firmware updating.

F.G.

P.GND

PWR

INIT

D-

GND

RxD

TxD

Link/Act

10/100M

D+

Содержание MDC-211-ZT














































Результаты поиска

Содержание MDC-211-ZT

Отзывы:

ICP DAS USA MDC-211-ZT, Руководство пользователя, Страница: 43 / 46

Результаты поиска

Содержание MDC-211-ZT

Отзывы: