![background image](http://html2.mh-extra.com/html/icp-das-usa/m-7026/m-7026_user-manual_3573567105.webp)
M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
105
2.47 ~AAEV
Description:
This command is used to enable or disable calibration for a specified module.
Syntax:
~AAEV[CHKSUM](CR)
~
Delimiter character
AA
The address of the module where calibration is to be enabled or
disabled in hexadecimal format (00 to FF)
E
The command to set the calibration
V
The command to enable or disable calibration
0: Disables calibration
1: Enables calibration
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Note:
This command must be sent before any other calibration command can be
used.
Examples:
Command: $010
Response: ?01
Attempts to send the command to perform a span calibration on module
01, but returns a response indicating that the command was unsuccessful
because the “Enable Calibration” command (~AAEV) has not yet been
sent.
Command: ~01E1
Response: !01
Enables calibration on module 01 and returns a response indicating that
the command was successful.
Command: $010
Response: !01
Sends the command to perform a span calibration on module 01 and
returns a response indicating that the command was successful.
Related Commands:
Section 2.6 $AA0, Section 2.7 $AA0N, Section 2.8 $AA1, Section 2.9 $AA1N,
Содержание M-7026
