ICP DAS USA ISaGRAF VP-23W7, Руководство пользователя

Страница: 47 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
3-3
3.2.3 Step 3 - Download ISaGRAF Project
Please download ISaGRAF project “vphmi_05” to the VP-25W7. This project is in the VP-2xW7/4xx7
CD-ROM:\napdos\isagraf\vp-25w7-23w7\demo\ “vphmi_05.pia”
vphmi_05 demo need one I-87055W (8 IN & 8 OUT board). If you don’t have it, you may download
“vphmi_01” (CD-ROM:\napdos\isagraf\vp-25w7-23w7\demo\ “vphmi_01.pia”)
If you know how to restore “vphmi_05.pia” to your ISaGRAF Workbench and download it to the
controller, please go ahead to the section
3.2.4 . However if you don’t know it, please refer to the below
steps. Please make sure the ISaGRAF Workbench is already installed to your PC. (Refer to the section 2.1
& 2.2 )
Steps To Backing Up & Restoring An ISaGRAF Project:
For archiving purposes you can "Back Up" and "Restore" an ISaGRAF project. For example, you may
want someone to test your program or email to
service@icpdas.com for ICP DAS’s ISaGRAF technical
service.
3.2.3.1 Backing Up An ISaGRAF Project
Open the "ISaGRAF Project Management", select "Tools" from the menu bar, click on "Archive", and
then click on "Projects". An "Archive Projects" window will open which allows you to designate where
you want to save the ISaGRAF project to. Click on the name of the ISaGRAF project you want to backup,
and then click on the "Backup" button. You can compress the size of the file you have backed up by
clicking on the "Compress" checkbox BEFORE you click on the "Backup" button.
Then you will now find the backed up ISaGRAF project file in the "Archive" location you have designated.
In the example above, the name of the backed up file is "simpleld.pia".