iCAM-
721F User’s Manual ICP DAS
56
4.3.4 Privacy Mask Tab
The
Privacy Mask
tabbed pane allows you to mask or block private areas from
surveillance for privacy reason.
The steps to block a private area from surveillance:
1) Select the masking shape, e.g., “Line,” “Rectangle,” or “Ellipse” (see figure
above) you wish to use as screen to block the area from surveillance.
2) Click and drag the mouse cursor to lay out a masking screen on the area you
wish to block, and then release the mouse right button. Notice that the laid
out screen turns into phantom block.
3) Once the masking screen is acceptable, click the
Enable Privacy Mask
check box.
4) Click the
Save
button. This will turn the laid out screen into solid block.
If the laid out screen needs correction, click
Delete
button and redo the
masking screen lay out process.
2)
Lay out masking
screens on the
areas to be
blocked from
surveillance
3)
Enable the
check box
4)
Click
Save
button
This is a “Line” type.
This is a “Rectangle”
type.
This is an
“
Ellipse
”
type.
1)
Select a masking
shape to block
the private area
you wish to
obstruct from
surveillance
