ICP DAS USA I-7532M-FD, Руководство пользователя

Страница: 7 / 48

I-7532M-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0) Page: 7
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.2. Features

Compatible with the ISO 11898-2 standard.

Compatible with CAN specification 2.0 A/B and FD.

CAN FD support for ISO and Non-ISO (Bosch) standards switchable.

CAN FD bit rates for data field from 100 kbps to 3000 kbps

CAN bit rates from 10 kbps to 1000 kbps.

Support CAN Bus message filter configuration. White-list filtering method and
each port supports 128 groups of standard IDs and 64 groups of extended IDs.

Support CAN/CAN FD frame forwarding rules, including basic forwarding rule,
mapping rule, merging rule and splitting rule. When receiving a frame on one
CAN port, this frame is processed via these rules and then send out to another
port. The process priority level of these rules are “merging rule” = “splitting rule”
> “mapping rule” > “basic forwarding rule”.

Support CAN network status analysis via Utility tool.

Messaging traffic of each port up to 10,000 fps.

The baud rate of each port can be different for highly flexibility.

Built-in switchable 120 ohm terminal resistor for CAN network.