SUPERVISOR SETUP MANUAL
Revision: 005
33
August, 2011
Configuring Wireless Upload
The Enable Uploading option allows you to wirelessly upload video from the ICOP
20/20 VISION.
Note: The Wireless Upload USB cable must be connected from the Wireless Upload
Controller on the rear of the DVR to the MDT for wireless video upload to be
performed.
To configure the Enable Uploading option, complete the following steps:
Step 1
Right-click within the title bar of the control.
Step 2
Select Configuration from the list. The ICOP 20/20 VISION
Configuration dialog appears.
Содержание 20/20 Vision
Страница 2: ......