SUPERVISOR SETUP MANUAL
Revision: 005
17
August, 2011
Setting Auto Login
The IACP “Digital Video Systems Minimum Performance Specifications Document”
requires that the recording media be secured using a security mechanism that
prevents unauthorized removal of the storage media from the recorder. In most
cases, this is implemented in the ICOP 20/20 VISION by requiring a valid,
Supervisor-configured password to be entered to gain access to the Remove Hard
Disk Drive command. However, it is recognized that the physical security of the
vehicle may be relied upon, and that the availability of the DVR to record an event
outweighs the need to require a password to be entered to activate the DVR.
ICOP recommends that you configure the ICOP 20/20 VISION to require that users
enter passwords to obtain access; however, ICOP recognizes that departmental
policies and procedures may be implemented to allow Auto Login functionality to
be utilized.
Auto Login allows users to initialize the ICOP 20/20 VISION and automatically have
it in an operational status without having to enter a password.
To set Auto Login, complete the following steps:
Step 1
In the Supervisor Setup screen; use
to scroll to User
Registration.
Step 2
Click Enter (
). The User Registration screen appears.
Содержание 20/20 Vision
Страница 2: ......