38
Specifications
ADC:
Dynamic Range: ............................................ 116dB, A-weighted
Signal-to-Noise Ratio:..................................... -116dB, A-weighted
THD+N Ratio: ................................................ -108dB, -1dBFS
DAC:
Dynamic Range: ............................................ 127dB, A-weighted
Signal-to-Noise Ratio: .................................... -127dB, A-weighted
THD+N Ratio: ................................................ -120dB, 0dBFS
Mic Input(XLR, Balanced):
Frequency Response: .................................... 20Hz to 20kHz (+/-0.1dB)
Noise EIN: ..................................................... <-120dB
Input Impedance: ........................................... 1.8K Ohms
Gain Range: .................................................. -6dB~+46dB
Maximum Input Level: ................................... +9dBu
Instrument Input(6.35mmTRS, Unbalanced):
Frequency Response: .................................... 20Hz to 20kHz (+/-0.1dB)
Input Impedance: ............................................ 390K Ohms, typical
Gain Range: ................................................... +6dB~+45dB
Maximum Input Level: .................................... +9dBu
Line Outputs 1/2 (Stereo, Unbanced):
Frequency Response: .................................... 20Hz to 20kHz (+/-0.1dB)
Nominal Output Level: .................................... +6dBu, typical;
Maximum Output Level:.................................. +10dBu;
Output Impedance: ......................................... 150 Ohm
Load Impedance: ............................................ 600 Ohm minimum
Headphone Outputs: (Stereo, Unbanced):
Frequency Response: .................................... 20Hz to 20kHz (+/-1dB)
Maximum Output Level:.................................. +9dBu, typical
Output Impedance: ......................................... 10 Ohm
Load Impedance: ............................................ 32 to 600 Ohms
