ICON ATV08, Руководство пользователя

Страница: 17 / 32

ICON EV Manual Operation and adjustment ATV08 17
Braking system
The braking system is an accessory
necessary for each bike and is the
key to traffic safety; before riding,
you must understand your braking
system, and do a good job in the
inspection and adjustment work.
The general idea is that upon hard
braking, the bike will surely stop
in a short distance, but that is
wrong. Upon hard braking, when
the wheels are suddenly jammed
by the brake rubber, the bike will
glide horizontally. It not only is
dangerous but the braking distance
will be lengthened.
Therefore, the braking system
should only be used to adjust the
speed of the bike.
The braking system typically
includes a Brake handle, brake(disk
brake, V brake and many other
types of brakes) and brake cable.
Brake handle
The structure of the Brake handle is as shown (in the left drawing),
and the left Brake handle controls the front brake and the right
Brake handle controls the rear brake.
• The adjusting screw is used to adjust the distance between the
brake shoe block and the Rim.
• The effective stroke of the brake cable is about a half of the
distance between the handle of the Brake handle and the
grip of the Across handle Stems; if the brake is tight when the
handle of the Brake handle is almost approaching to the grip of
the Across handle Stems, the distance between the brake shoe
block and the Rim is too large, it needs to be adjusted.