ICON ATV08, Руководство пользователя

Страница: 14 / 32

ICON EV Manual Operation and adjustment ATV08 14
Introduction to speed
boosting system
The speed boosting system is also known as 1:1
boosting system. If you are pedaling with your
feet, then the 1:1 boosting system sensor of your
bike will automatically sense your riding speed and
control the motor to assist you at the same speed
so as to make your ride easier and make the help
you ride further.
1:1 boosting system comprises a controller, sensor
and induced cartridge.
Charging
Transportation and storage before purchase will
likely result in a loss of power to the battery. The
battery should be charged before first use.
The charger configured or designated by ICON EV
must be used for charging; use of another charger
might damage the battery, and may even lead to
fire and other danger. Problems caused by use of an
unissued charger are not covered by the warranty.
Installation and charging of battery
(as shown in Figure 1 and Figure 2)
① Controller
② Sensor
③ Induced
① ②