9
Mac driver installation
UtrackPro is a class compliant device. Thus there is no driver installation
needed for Mac. Also, it fully supports iOS devices by connecting the unit to a
camera kit.
Please follow the step-by-step procedures below to install your UtrackPro USB
recording interface.
1. Turn on your Mac
(
Note:
Do not connect the UtrackPro digital audio interface to your Mac yet.)
2. Class compliant device
UtrackPro is class compliant on macOS, so no driver installation is
needed.
3. Copy the software control panel shortcut logo to your
desktop
Open the previous “Mac” folder. Copy the “ProDrive
Ⅲ
” software panel shortcut
logo and paste it to your desktop.
4. Launch the software control
panel
Click the UtrackPro ’s software
control panel shortcut logo you have
just copied to your desktop to launch
the software control panel.
Diagram 1
Mac
Ⅲ
Ⅲ
Ⅲ
Ⅲ
UtrackPro
Ⅲ
Ⅲ
Diagram 2