8
Rear Panel
3
2
3
1
4
6
5
1. USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC’s USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of
UtrackPro .
2. Line inputs 3/4
These are unbalanced analog inputs on standard 1/4″ TS connectors at
–10dB line level.
3. Line outputs 1-4
These are unbalanced analog outputs on standard 1/4″ TS connectors at
+6dBU line level.
4. S/PDIF coaxial I/O connectors
S/PDIF digital input and output on coaxial RCA connectors. The digital input
is selected via the UtrackPro 's software control panel, while the digital output
will be sent to the coaxial.
5. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors
6. 12V/1A power adaptor
Connect the provided power adaptor here.
Note:
UtrackPro is not able to work without the provided power adaptor
connected. The USB bus power is not able to provide sufficient power supply
for UtrackPro .
