12
14
13
15.
Make sure that all parts of the elliptical are properly tightened.
Extra parts may be included. Place a mat
under the elliptical to protect the floor.
14. First, connect one end of the Power Supply (97)
to the Power Wire (71) and then the other end to
the Electrical Socket.
13. While a second person holds the Console (5)
near the Upright (2), connect the wire (C) on
the Console to the Upright Wire (49). Insert the
excess wire into the Upright.
Tip: Avoid pinching the wires.
Attach
the Console (5) to the Upright (2) with two
M5 x 12mm Screws (80);
start both Screws,
and then tighten them.
Then, plug the Pulse Wire (81) into the
receptacle on the back of the Console (5).
Electrical
Socket
Avoid
pinching
the wires
5
97
71
2
81
80
C
49