12
HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO CONNECT THE AC ADAPTER
IMPORTANT: If the elliptical exerciser has been
exposed to cold temperatures, allow it to warm to
room temperature before you plug in the AC
adapter. If you do not do this, you may damage
the console displays or other electronic compo-
nents.
Plug one end of the
included AC adapter
into the jack on the
back of the console.
Plug the other end of
the AC adapter into
an appropriate outlet
that is properly
installed in accor-
dance with all local
codes and ordi-
nances.
Note: The console can also be operated with four 1.5V
D batteries (not included); alkaline batteries are rec-
ommended. Locate the battery cover on the back of
the console. Remove the battery cover, insert the bat-
teries into the battery compartment, and then reattach
the battery cover.
Make sure to orient the batteries
as shown by the diagrams inside the battery com-
partment.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Due to the size and weight of the elliptical
exerciser, moving it requires two persons.
Stand in
front of the elliptical exerciser, hold the upright, and
place one foot against one of the front wheels. Pull on
the upright and have a second person lift the handle
on the ramp until the elliptical exerciser will roll on the
front wheels. Carefully move the elliptical exerciser to
the desired location, and then lower it to the floor.
Place
your foot
here
Pull on
the upright
Lift here
AC
Adapter