9
6. Press a Base Cap (91) into the Base (99).
91
99
6
7. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (57) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Attach a Wheel (95) to the Base (99) with an
M10 x 50mm Bolt (26) and an M10 Locknut
(36).
Do not overtighten the Locknut; the
Wheel must turn freely.
7
99
95
26
57
36
A
B
8. Hold a Bolt Spacer (98) inside the lower end of
the Left Upright (79). Insert an M10 x 96mm Bolt
(7) with an M10 Star Washer (8) into the Left
Upright and the Bolt Spacer.
Repeat this step
with a second Bolt Spacer (98), M10 x 96mm
Bolt (7), and M10 Star Washer (8).
Orient the Left Upright Spacer (89) and the Left
Upright (79) as shown. Hold the Left Upright
Spacer and the Left Upright against the Base
(99). Tighten the M10 x 96mm Bolts (7) until the
heads of the Bolts touch the Left Upright;
do not
fully tighten the Bolts yet.
89
79
7
99
98
8
8
