12
14. Have a second person hold the console assem-
bly near the Right Upright (80).
Connect the Wire Harness (92) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
Remove the wire tie from the Wire
Harness. Then, insert the connectors into the
Right Upright (80).
Set the console assembly on the Right Upright
(80) and the Left Upright (not shown).
Make sure
that no wires are pinched.
80
Console Assembly
Console Wire
Wire Tie
92
14
92
Console
Wire
13. Attach the Left Handrail (21) to the console as-
sembly with three M4.2 x 19mm Screws (1).
Start all three Screws before tightening any
of them; do not overtighten the Screws.
21
13
Console
Assembly
1
1
