7
CONNECTION PORT SETTINgS
7-32
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
Receive Detection Setting
These items are displayed when “Transceiver” is selected as a connected unit.
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Edit the DTMF Dialing settings.
1
Attack Time
Set the TX Attack time. It is the delay time before the VOX switch turns
ON after an audio signal is received through the network. (Default: 50)
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
2
Release Time
Set the RX Delay time. It is the delay time for the VOX switch to turn
OFF after no audio signal is received through the network.
(Default: 200)
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
3
Voice Delay
Enter the period of time to store the audio.
(Default: 5)
L
When the Receive Detection is set to “VOX,” the default value is “50.”
• Range: 0 ~ 1500 (milliseconds) in 5 millisecond steps
4
VOX Threshold
Enter the voice threshold level.
(Default: 40)
• Range: 0 ~ 100 (%)
5
Ignore Time
Enter the period of time to ignore the detected SQL signal.
(Default: 300)
• Range: 0 ~ 2000 (milliseconds) in 5 millisecond steps
3
4
1
2
5
L
1
and
4
are displayed only when “Connection Unit” is set to “Transceiver,” and the “Receive Detection” is set to
“VOX.”
L
2
is displayed only when “Connection Unit” is set to “Transceiver,” and the “Receive Detection” is set to “VOX” or
“SQL.”
L
3
is displayed only when “Connection Unit” is set to “Transceiver.”
L
5
is displayed only when “Connection Unit” is set to “Transceiver,” and the “Receive Detection” is set to “SQL.”
