6
TRANSCEIvER CoNTRoLLER
6-54
■
Wireless LAN
Register wireless LAN settings that are commonly used by the IP100Hs.
You can individually set the common settings to each registered group in [Profile] on the [Common Settings] screen.
If any setting in this screen has been changed, you must reboot the IP100Hs.
Transceiver Controller > Common Settings > Wireless LAN
Wireless LAN screen
1
No. �����������
Select a group number between 1 and 20 to assign to the IP100Hs.
Up to 20 groups can be registered.
(Default: 1)
2
Name ����������
Enter a Group name of up to 31 characters.
(Default: Blank)
3
Scan Mode �������
Select the frequency band that the IP100H uses.
(Default:
M
✔
11g,
M
✔
11a (
M
✔
W52,
M
✔
W53,
M
✔
W56))
Selecting “11g” includes “11b.”
L
Access points that comply with the wireless LAN standards can be used with
the IP100H.
1
2
3
4
5
6
7
8
9
10
11
12
