Icom SR-VPN1 Скачать руководство пользователя страница 123

Страница: 123 / 143

MAINTENANCE

6-2

You can save the SR-VPN1’s settings to a PC or USB flash drive.
The saved settings can be used to recover the configuration.

• The settings can be directly loaded into the SR-VPN1 from the USB flash drive.

1. How to save the SR-VPN1’s setting to a PC

Click [Management], then [Backup/Restore Settings].

• The [Backup/Restore Settings] screen appears.

Click <Backup>.

• The File Saving window appears.

Select the desired folder/location, then click [Save] in the File Saving window.

• The setting file (extension: “sav”) is saved to the selected folder.
• The default file name is composed of the model name (SR-VPN1), version number and date.

Saving the setting

The settings which have been

changed from the factory defaults.

Click

Содержание SR-VPN1
















































































































































Результаты поиска

Содержание SR-VPN1

Отзывы:

Похожие инструкции для SR-VPN1

Бренды по названию

Популярные бренды

Icom SR-VPN1, Инструкция по эксплуатации

Результаты поиска

Содержание SR-VPN1

Отзывы:

Похожие инструкции для SR-VPN1

Бренды по названию

Популярные бренды