Icom rs-ba1 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 101

Icom rs-ba1 Скачать руководство пользователя страница 94

68

TROUBLESHOOTING

6

The following descriptions are possible causes and solutions for the problem you are experiencing.
If you cannot solve the problem after trying these solutions, please contact your nearest Icom Dealer or Service
Center.

Problem: Cannot access a Server from a Remote station with the Remote Utility

You can configure the Server information in the Server Registration screen (Radio Operation mode

➔

Server List

screen

➔

[Add] or [Properties]).

❍

“CONNECT NG” is displayed under the Server name

Possible cause 1

An incorrect IP address, domain name, computer name* or network name is entered
to request a connection to the Server.

If the Remote Utility cannot get the Base station’s IP address using the domain

name, computer name or network name that you entered, “Cannot resolve the
name” is displayed next to the name.

Solution

q

Check the Base station’s IP address, domain name, computer name* or network
name. (pp. 15 to 32, 45, 42)

w

Enter the Base station’s correct IP address, domain name, computer name* or net-
work name in the

Server Address or Network Name

field in the Server Registra-

tion screen.

*Only When connecting to the network through a PC

Possible cause 2

The control port number is different than that of the Base station.

Solution

q

Check the Base station’s control port number*. (p. 31)

w

Enter the correct port number in the

Control Port (UDP)

field in the Sever Registra-

tion screen.

*

The default number is “50001.”

Possible cause 3

The virtual driver is not installed in the Remote station’s PC.

Solution

Install the virtual driver in the Remote station’s PC.

(See the RS-BA1 Preparations for details.)

❍

“LOGON NG” is displayed under the Server name

Possible cause

The user ID or password is different than that in the Base station’s Remote Utility.

Solution

q

Check the Remote station information registered in the Remote Utility. (p. 32)

w

Enter the correct user ID and password into the

User ID

and

Password

fields in the

Sever Registration screen.

❍

“DISABLED” is displayed under the Server name

Possible cause

The Server is set to “Disable,” to inhibit connecting to it.

Solution

Enable the Server by removing a check mark from the

Disable

box in the Sever Reg-

istration screen.

“CONNECT NG”

“LOGON NG”

“DISABLED”

The connection

error message

When connecting to the network through a PC:

• Is the Remote Utility activated?
• Is the Remote Utility added as an exception in the Fire-

wall? (pp. 1 to 6)

• Is your Remote station information registered in the Re-

mote Utility’s User List screen? (p. 32)

When connecting to the network directly:

• Is the radio turned ON?
• Is the “Network Control” item set to “ON” in the Others set

• Is your Remote station information registered in the Others

set mode? (p. 47)

NOTE:

If you could not solve the problem after trying the above solutions, check the following on the Base station side.

«
...
92
93
94
95
96
...
»

Содержание rs-ba1






































































































Отзывы:

Нет отзывов