62
REMOTE CONTROLLER’S BASIC OPERATION
5
This section describes how to connect to a radio and remotely control it using the Remote Controller.
There are two ways to connect to the radio with the Remote Controller:
1. Connecting to the radio through a network using the Remote Utility (p. 63)
2. Directly connecting to the radio that is physically connected to your PC, instead of using the Remote Utility (p. 64)
When using the Network function of the radio (IC-7700 with firmware version 2.00 or later, IC-7800 with firmware
version 3.00 or later, or an IC-7850 or IC-7851), connect to the radio through the network.
■
Connecting to a radio with the Remote Controller
D
Connects to the radio (pp. 63, 64)
D
D
Displays the Connect Setting screen (pp. 63, 64)
D
To use transmit audio input from the PC (p. 65)
NOTE:
See the RS-BA1 Remote Controller’s help file for remote operation details, such as how to change the fre-
quency, or turn ON each function.
To display the help file, click “Contents” in the Help menu on the Remote Controller, or push the [F1] key on your
PC’s keyboard.