4
SETTINGS FOR A REMOTE STATION PC
58
■
Audio adjustment using the Remote Utility
While connected to a radio, you can adjust the received and transmit audio volume through the network using the
Remote station’s Remote Utility.
The description in this section is based on the assumption that the connection to the radio has succeeded
(“<<CONNECT>>” is displayed under the radio name).
D
Received audio volume adjustment
q
In the Remote station’s Remote Utility, open the
Radio List screen.
How to open:
Select the ‘Radio Operation’ mode,
then click the [Radio List] tab.
w
Select a radio with “
<<CONNECT>>
” under its name.
e
Click [AF].
r
Slide the adjustment bar on the
Volume
field up or
down to adjust the received audio volume level.
• Click [Mute] to mute the audio, and click once again to
hear the audio.
t
Click [Close] to close the screen.
NOTE:
• The AF adjustment bar on the Volume field moves
together with the [AF] control of the Remote Con-
troller. However, if you use another control soft-
ware, the audio volume level on the network can
only be adjusted with the Remote Utility.
• You cannot adjust the received audio volume level
of the radio’s speaker, with the Remote Utility. Use
the [AF] control on the radio to adjust it.
q
Select
w
Select
e
Click
r
Adjust
t
Click
