2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
34
D
Radio’s basic information setting
q
In the Base station’s Remote Utility, open the Radio
List screen.
How to open:
Select the ‘Server Setting’ mode,
then click the [Radio List] tab.
w
Click [Add] to display the Radio Registration screen.
e
Enter a name for the radio in the
Radio Name
field,
of up to 16 characters.
r
Click the
CI-V
box to make a check mark, then
enter the radio’s CI-V address in the
Address
field.
t
Select the radio’s baud rate in the
Baud Rate
menu.
y
Click the
Public
box to make a check mark.
u
Click [OK] to save the settings, and close the
screen.
NOTE:
• Be sure to enter the same CI-V address and the
baud rate that are programmed into the radio.
If the radio’s baud rate is set to “Auto,” select
“19200” in the
Baud Rate
menu.
If you are using the Spectrum Scope function with
the IC-7850, IC-7851, or IC-7300 using a USB for
the connection, select “115200” in the
Baud Rate
menu.
See page 21 for details of radio’s presetting.
See the radio’s instruction manual for details on
how to confirm the radio’s CI-V address and baud
rate, or how to change them.
• To not allow Remote stations to access a radio,
remove the check mark from the
Public
box.
■
Radio registration (Continued)
e
Enter
rt
Enter
y
Make a check mark
q
Select
w
Click
