Icom MR-1220 Series Скачать руководство пользователя

Страница: 40 / 80

ADvANCED OPERATION

Waypoint indication

Displaying your tracks

The Plot function tracks your route on the screen.

Displaying your track

To display your vessel’s track, turn ON the “Display

Own Track” setting in the Display menu.

[MENU]/[

] > Display >

Display Own Track

• When this function is on, the Own track icon is displayed.

Your

track

Own

track

icon

TIP:

You can customize your own track settings,

such as track interval or track color in the Display

menu.

[MENU]/[

] > Display >

Interval (Own Track)

[MENU]/[

] > Display >

Color (Own Track)

Refer to the Menu screen section for the details.

Resetting your track

1. Select the “Clear Own Track” setting in the

Display menu, and push [ENTER]/[

]

Push [◄] to select <OK>, and then push [ENTER]/

[

] to apply.

• Your track is cleared.

3. Push [MENU]/[

] to exit the Menu screen.

If the received NMEA 0183 data through the NMEA 2

connector includes the Waypoint data, the radar can

plot the Waypoint marker on the screen.

Displaying the Waypoints

To display the Waypoint marker, turn ON the “Display

Waypoints” setting in the Display menu.

[MENU]/[

] > Display >

Display Waypoints

Waypoint

marker

Information

box

The details on the Waypoint can be displayed in

the Information box. Move the cross-line cursor

onto the line of the Waypoint marker, and then push

[ENTER]/[

] to select the Waypoint marker.

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды