Icom MR-1220 Series Скачать руководство пользователя страница 24

Страница: 24 / 80

DISTaNCE aND DIRECTION MEaSuREMENTS

Bearing and distance measurement

This radar has two sets of Electronic Bearing Lines (EBL) and Variable Range Markers (VRM) to indicate the

target direction from your vessel to a target.

Using the EBL and VRM

1. Move the cursor onto a target.

Push [EBL 1 (VRM 1)]/[

] to display

the EBL 1 and VRM 1 markers.

Push [◄] or [►] to rotate the Electronic Bearing

Line (EBL), and push [▲] or [▼] to increase or

decrease the Variable Range Marker’s (VRM) ring

size.

•

The EBL/VRM 1 readout in the lower left corner of

the screen indicates the target bearing and distance

in orange.

Push [ENTER]/[

] to apply the EBL 1 and

VRM 1.

•

The EBL 1/VRM 1 readout changes to black.

5. Move the cursor onto another target.

Hold down [EBL 1 (VRM 1)]/[

] for

1 second to move the EBL 1 and VRM 1 to the

cursor.

Hold down [EBL 1 (VRM 1)]/[

] for 1

second again to move the EBL 1 and VRM 1 to the

original place.

Push [EBL 1 (VRM 1)]/[

] to clear the

EBL 1 and VRM 1.

TIP:

The indication may differ, depending on the

“Bearing Mode” and “Bearing Reference” setting.

[MENU]/[

] > System >

Bearing Mode

[MENU]/[

] > System >

Bearing Reference

• 0 to 359.9°R: Relative direction, clockwise from

the vessel’s bow. (when “360°R”

is selected)

•

P/S 0 to 180°R: Relative direction, left or right

from the vessel’s bow.(When

“PT/SB” is selected)

• 0 to 359.9°T:

True bearing. (When “True” is

selected in both Bearing Mode

and Bearing Reference.)

Bearing data is required.

• 0 to 359.9°M: Magnetic bearing. (When

“Magnetic” is selected in Bearing

Mode and “True” is selected in

“Bearing Reference.”)

EBL 1

marker

VRM 1

marker

EBL 1/VRM 1

readout

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Бренды по названию

Популярные бренды