Icom MR-1220 Series Скачать руководство пользователя

Страница: 10 / 80

PANEL DESCRIPTION

Using the context menu

The radar can display a context menu to shortcut to

frequently used functions, by holding [ENTER]/[

]

for 1 second.

The items in the context menu vary, depending on your

operating situation, for example, selected target, display

mode, and so on.

1. Move the cursor to a target.

• The target icon is highlighted in orange.

2. Hold down [ENTER]/[

] for 1 second.

• The context menu is displayed.

(Example: An AIS target)

3. Select an item, and then push [ENTER]/[

Push [CLEAR]/[

] to return to the PPI screen.

4. Do the operation in the selected function.

Menu screen operation

You can customize the infrequently changed values or

function settings in the Menu screen.

Routes in the Menu screen, setting screen and the

setting items are described in the following manner:

[MENU]/[

] > System >

Key Beep

This shows the “Key Beep” item in the “System”

menu.

The typical operation in the menu screen is as follows:

(Example: Turning OFF the Key Beep)

1. Push [MENU]/[

• The menu screen is displayed.

Menu

Item

Push [◄] or [►] to select a menu.

(Example: System)

Push [▲] or [▼] to select an item (Example: Key

Beep), and then push [ENTER]/[

Push [▲] or [▼] to select an option (Example:

OFF), or increasing or decreasing the value, and

then push [ENTER]/[

] to apply.

5. Push [MENU]/[

] to exit the menu screen.

NOTE:

The Menu screen disappears 10 seconds

after the last operation.

See the Menu screen section for details on each

menu or setting item in the Menu screen. (p. 37)

Содержание MR-1220 Series

















































































Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды

Icom MR-1220 Series, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1220 Series

Отзывы:

Похожие инструкции для MR-1220 Series

Бренды по названию

Популярные бренды