1
1
PANEL DESCRIPTION
q
GROUND TERMINAL
Connect a ground wire to ground to prevent electri-
cal shocks.
w
DC POWER INPUT TERMINALS
Connect the 12 V/24 V DC power source through
the DC power cable.
e
DATA IN/OUT CONNECTOR [DATA IN/OUT]
Connect an Icom AIS Transponder, Marine VHF
transceiver or navigation equipment.
See page 14 for the [DATA IN/OUT] connector infor-
mation details.
r
EXTERNAL DISPLAY CONNECTOR
[EXT-DISPLAY]
Connect an external monitor or a PC monitor with a
D-sub 15-pin connector (DE-15).
The monitor shows the same display as the MAIN
display.
• The monitor resolution of 800 × 600 pixels or higher is
required.
• The monitor shows the same display as the MAIN dis-
play.
t
MAIN DISPLAY UNIT CONNECTOR [MAIN]
SUB DISPLAY UNIT CONNECTOR [SUB]
Connect the MXD-5000 Display unit. Two display
units can be connected.
y
BLACK BOX CONNECTORS
• Connector 1 to 3
Connect a black box unit such as, an MXR-
5000R/T Radar unit, an MXF-5000 Fish finder unit
or another MXP-5000 Main unit.
• Connector 4
Not used.
If you connect an MXR-5000R/T or MXF-5000 to
this connector, these units will not operate.
u
VIDEO IN CONNECTORS
Four video inputs, such as onboard cameras, can
be connected. An RCA type connector is used for
these connectors. NTSC or PAL format is compati-
ble.
i
NMEA2000 CONNECTOR [NMEA2000]
Connect NMEA 2000 sensors to monitor, the en-
gine, fuel, engine temperature, wind, GPS, Com-
pass and STW.
o
HEADING CONNECTOR [HEADING]
Connect a heading sensor.
This connector is the same as port 2 of the [DATA
IN/OUT] connector.
See page 14 for the [DATA IN/OUT] connector infor-
mation details.
!0
GPS RECEIVER CONNECTOR [GPS]
Connect the MXG-5000 GPS receiver.
MAIN
DATA IN/OUT
EXT-DISPLAY
NMEA2000
BLACK BOX
1
2
3
4
HEADING
GPS
DC IN
DISPLAY
SUB
VIDEO IN
1
2
3
4
q
r
e
w
!0
i
o
y
u
t
■
MXP-5000 (Main unit)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
