Icom MA-510TR, Инструкция по эксплуатации

Страница: 14 / 64

5
3
PREPARATION
■
Entering Own ship data
Your vessel’s information is exchanged among vessels and/or base stations.
NOTE:
After entering the MMSI code, the transponder automatically enters the “OWN
SHIP DATA” screen. In this case, skip steps 1 ~ 3.
1. Push [MENU].
•The Menu screen is displayed.
2. Push [▲] or [▼] to select “AIS settings,” and then
push [ENT].
•The “AIS SETTINGS” screen is displayed.
L
Holding down [▲] or [▼] sequentially scrolls up or
down through the Menu screen.
3. Push [▲] or [▼] to select “Own ship data,” and then
push [ENT].
•The “OWN SHIP DATA” screen is displayed.
4. Push [▲] or [▼] to select an item.
L
See the next page for details.
5. Push [▲] or [▼] to select or enter an option or value,
and then push [ENT].
•The transponder returns to the previous screen.
TIP:
• Select a number, character, or space using [▲],
[▼], [◄], and [►].
•Push [ENT] to enter the selected number or
character.
• Select “←” or “→” on the screen to move the cursor.
6. Repeat steps 4 and 5 to set other items.
7. When the transponder automatically enters the “OWN
SHIP DATA” screen after entering the MMSI code,
push [CLR] to finish entering Own ship data.
• “Your information entry finished.” is displayed.