5
OPTIONAL PRODUCTS
5-22
1. While hold down [FUNC] and [Address], turn ON the power.
•
Enters the Set mode.
2. Release [FUNC] and [Address] when “SET” is displayed.
3. Push [FUNC] several times to select “Initialize Bluetooth Unit.”
4. Push [▲]/[▼] to select “YES.”
•
To cancel the initialization, push any key other than [Call history].
5. Push [Call history].
•
The pairing list is initialized and IP501H automatically restarts.
■ Initializing the pairing list of the IP501H
If you have some troubles with the Bluetooth operation, initialize the pairing list, as shown below.
L
All the paired Bluetooth devices are deleted from the pairing list by the initialization.
L
The pairing list is not initialized by the “RESET” item in the Set mode.
– – –
LOG
SET
YES
Initialize Bluetooth
SET
[電源/音量]
ツマミ
[FUNC]
キー
[▲]/[▼]
キー
[履歴]
キー
[アドレス帳]
キー
[PWR/VOL]
[FUNC]
[Call history]
[Address]
[▲]/[▼]
