Icom IP501H страница 42 Скачать руководство пользователя

Страница: 42 / 72

OPTIONAL PRODUCTS

5-7

■ Insert the IP501H into the BC-218

■ Charging with the optional BC-218

The BC-218 is designed to rapidly charge the BP-272 Li-ion

battery pack.

Charging indicator

Orange: Charging

Green: Charged

Battery pack

+ Transceiver

Optional CP-22 or CP-23L

can be used.

Power adapter

BC-207S*

To an AC

outlet

You can insert and charge a transceiver that has the belt clip attached. Attach the

belt clip, then insert the IP501H into the BC-218 until it is locked in place.

Approximate charging time

BP-272: 2.1 hours (when charging the battery pack only)

Charging time may differ, depending on the using

conditions of the transceiver while charging.

NOTE:

•

The rapid charger, BC-218 has a charging timer that

stops charging after approximately 5 hours has passed.

•

If the battery pack does not properly charge when

it is attached to the transceiver, remove it from the

transceiver and insert only the battery pack into the

charger.

•

After charging is completed, the BC-218 will

automatically recharge a battery pack when the battery

voltage decreases. When the battery pack is often left in

the BC-218 for long periods of time, the battery life cycle

will be shortened.

* May not be supplied, or the shape may differ, depending on the charger version.

Belt clip

BC-218

Содержание IP501H









































































Результаты поиска

Содержание IP501H

Отзывы:

Похожие инструкции для IP501H

Бренды по названию

Популярные бренды

Icom IP501H, Инструкция по эксплуатации

Результаты поиска

Содержание IP501H

Отзывы:

Похожие инструкции для IP501H

Бренды по названию

Популярные бренды