2
SETTING UP THE IP1000C SYSTEM
2-10
2. Transceiver settings
■
About the ID list
Enter Names, Call types and so on in an ID list that the WLAN transceiver will use.
After registration is finished, the WLAN transceiver needs to be rebooted.
When using the ID list, set the “Use ID List” to “Enable.” (p.4-40)
Click [Common Settings], then [ID list].
•The [ID List] screen is displayed.
1
Select the ID list group in the “ID List Common Settings” field.
•The ID list group number (example: 1) is used in the “ID List” item on the [Common Settings] screen.
2
After registration is finished, confirm the registered contents in the “ID List Entries” field.
4
Confirm
Enter the name, Call type, and destination ID (00001 ~ 60000) in the “ID List” field, then click <Apply>.
3
q
Enter
w
Click
Select “Select From List” when selecting the
registered Destination ID in the [Transceiver
Registration] screen or [Destination Settings] screen.