2
SETTING UP THE IP1000C SYSTEM
2-7
2. Transceiver settings
■
About the WLAN transceiver settings
Example: For the IP100H
Set and assign functions to each registered WLAN transceiver.
After the settings have been changed, the WLAN transceiver needs to be rebooted.
After registration is finished, confirm the registered contents in the “Transceiver Setting List” field.
4
Click [Transceiver Settings], then [Transceiver Settings].
•The [Transceiver Settings] screen is displayed.
1
Select the “Unit ID” item to be set, then select and assign functions, depending on your requirements.
2
Click <Apply>.
3
q
Select
w
Enter
Click
Confirm