Icom iM506, Инструкция по эксплуатации

Страница: 123 / 124

New2001
114
16
TROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
New2001
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does
not turn ON. • Bad connection to the power supply. • Check the connection to the transceiver and
power supply.
p. 101
Little or no sound comes
from the speaker. • Squelch level is set too high.
• Volume level is set too low.
• Speaker has been exposed to water. • Set the squelch to the threshold point.
• Set the volume to a suitable level.
• Remove the water with the AquaQuake func
-
tion.
p. 3
p. 4
p. 15
Transmitting is impossi-
ble, or high power can-
not be selected. • Some channels are programmed for low
power or receive only by regulations.
• The output power is set to low.
• Change channels.
• Push [HI/LO] to select high power.
pp. 9,
10, 11
p. 11
Scan does not start. • More than 2 favorite channels are not pro-
grammed.
• Set the desired channels as Favorite chan -
nels.
p. 17
No beep sounds. • Beep tones are turned OFF. • Turn the beep tones ON in the CONFIGURA -
TION menu.
p. 93
Distress calls cannot be
transmitted. • MMSI (DSC self ID) code is not pro -
grammed.
• Program the MMSI (DSC self ID) code. p. 8
Does not record or does
not record properly. • The memory IC is not working. • The memory IC should be replaced.
Ask your service center or technical dealer
for details.
—