Icom iM423, Инструкция по эксплуатации

Страница: 22 / 108

13
4
BASIC OPERATION
Call channel programming
■
You can program the Call channel with your most often-used
channel in each channel group for quick recall.
Select the desired channel group (INT, USA or CAN) to be
q
programmed. (p. 10)
Hold down [16/C] for 1 second to select the Call channel of
w
the selected channel group.
• “CALL” and the Call channel number appear.
Hold down [16/C] again for 3 seconds (until a long beep
e
changes to 2 short beeps) to enter the Call channel pro-
gramming mode.
Rotate Dial or push [
r
∫ ](CH)/[ √ ](CH) to select a channel.
Push [ENT] to program the displayed channel as the Call
t
channel.
• Push [CLEAR] to cancel.
Channel name programming
■
Each channel can be assigned a unique alphanumeric ID of
up to 10 characters.
Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + ,
– .
/ [ \ ] ^ _ : ; < = > ?) and a space can be input.
Push [
q
∫
](CH) or [
√
](CH) to select a channel.
• First, cancel the Dualwatch, Tri-watch or Scan function, if acti -
vated.
Push [NAME] to open the channel name programming
w
screen.
• A black box is displayed on the first character.
Enter the desired channel name in the following manner:
e
• Select a desired character using Dial, or [ ∫ ]/[ √ ]/[ Ω ]/[ ≈ ].
• Push [ENT] to set it.
• To move the cursor, select either arrow, “
← ” or “ → ,” then push
[ENT].
• Select “SPACE,” then push [ENT] to input a space.
• Select “DELETE,” then push [ENT] to delete a character.
• Push [CLEAR] to cancel and return to the previous screen.