Icom iM423, Инструкция по эксплуатации

Страница: 16 / 108

New2001
7
2
PANEL DESCRIPTION
Speaker Microphone
■
Microphone
Speaker
w
q
e
q
PTT SWITCH [PTT]
Hold down to transmit, release to receive. (p. 11)
w
CHANNEL UP/DOWN KEYS [ Y ]/[ Z ]
Push either key to check TAG channels, Set mode set-
➥
tings, and so on. (pp. 11, 75)
Push either key to change scanning direction or manu-
➥
ally resumes a scan. (p. 18)
e
TRANSMIT POWER KEY [HI/LO]
Push to toggle the power high or low. (p. 11)
➥
• Some channels are set to only low power.
While holding down [HI/LO], turn ON the power to turn
➥
the Microphone Lock function ON or OFF. (p. 14)
Softkey function
■
Various functions can be assigned to the softkeys. When a key
function is assigned, the key icon is displayed above the soft-
key, as shown below. Consult your Icom dealer for details con-
cerning which functions are preprogrammed into the keys.
Softkey function selection D
When “
➥
Ω ” or “ ≈ ” is displayed beside the key icon, push-
ing [ Ω ] or [ ≈ ] sequentially shows the previous or next key
function that is assigned to the softkey.
Push Push
*
*Push this key to start
and stop scan.
The order of the key icons may differ, depending on the
preprogramming.
For Chinese version transceiver:
• [ ] appears instead of [ ].
• [ ] does not appear.