7
NXDN™ OPERATION
7-32
Transmitting a call (Continued)
D
Transmitting an Emergency call
An NXDN Emergency call can be transmitted in
the same way as the Conventional operation. See
“Emergency call” for details. (p. 4-2)
D
Direct ID entry
From the Menu, you can directly enter the target ID.
L
The optional DTMF microphone is required for the
Mobile type transceiver.
1. In the Contact menu screen, push
[P2](
Ω
) or
[P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to select “DIRECT
DIAL,” then push
[P1](ENT)
or
[P2]
.
Portable
CONTACT
DIRECT DIAL
ENT
BACK
Mobile
C O N T A C T
D I R E C T
D I A L
•Enters the ID Entry mode.
2. Push the appropriate digit key, [0] to [9], to enter
an ID.
L
To delete, push
[P0](BACK)
or
[P1]
.
L
If you enter an invalid ID, “INVALID” is displayed.
Portable
DIRECT DIAL
123
ENT
BACK
Mobile
D I R E C T
D I A L
1 2 3
3. Push
[P1](ENT)
or
[P2]
to set the entered ID.
NOTE:
See the appropriate page for details on how
to operate after entering the ID. (p. 7-4 ~ 7-31)
D
Transmitting Position data
When the GPS function is ON, and the internal GPS
receiver receives Position data, the longitude and
latitude data can be automatically transmitted:
•When a GPS request status message is received
•After sending a voice message
L
Set the ‘Send with Login’ and ‘Send with Logoff’ items to
‘Enable.’
•After sending a status message
L
Set the ‘Send with Status Call’ item to ‘Enable.’
•After sending a message
L
Set the ‘Send with SDM Call’ item to ‘Enable.’
•After sending a Call Alert
L
Set the ‘Send with Call Alert’ item to ‘Enable.’
•After sending an Emergency call
L
Set the ‘Send with Emergency’ item to ‘Enable.’
L
Set the ‘Send at ManDown’ item to ‘Enable.’
•At the preset interval
L
Set the ‘Auto’ item to ‘Enable.’
L
Set the ‘Interval Timer [mm:ss]’ item.
Previous view
