7
NXDN™ OPERATION
7-4
Transmitting a call
NXDN operation enables you to make a call to a
specific station (Individual call) or to a particular group
(Talkgroup call). Other digital mode transceivers on
the channel will not receive a call that does not match
their Individual or Talkgroup ID and/or RAN (Radio
Access Number) code.
D
Transmitting a Voice call
You can transmit a Voice call to a target station or
Talkgroup stations.
<Menu operation>
TIP:
The Portable type transceiver’s operations are
described in
red
. And the Mobile type transceiver’s
operations are described in
blue
.
L
The common operations are in black.
(MENU >
CONTACT
)
1. Push [Menu] to display the Menu screen.
•“CONTACT” is selected.
Portable
ENT
BACK
CONTACT
Mobile
M E N U
C O N T A C T
L
When you want to send a Voice call, Call Alert call,
Status message, or message to all transceivers
within the communication range, use the ‘All Call’
function.
Select the Talkgroup ID code “65535” for the
Conventional operation, or “2047” for the Trunking
operation.
2. Push
[P1](ENT)
or
[P2]
.
•
The current call type is briefly displayed, then the
Contact menu screen is displayed.
L
To change the call type, see page 7-3.
Portable
CONTACT 1
TG1
ENT
BACK
Mobile
C O N T A C T
1
T G 1
3. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select the destination ID.
•The preset ID is displayed.
TIP:
If “DIRECT DIAL” is selected, you can
manually enter a target ID. See page 7-32 for
details.
4. Hold down [PTT] to transmit, and speak at your
normal voice level.
• The status indicator lights red while transmitting.
5. Release [PTT] to receive.
Previous view
